Sort by:
Topspin for 12 plants, 20 mm
€32,87
Regarding this array: Topspin 12 – 45° needle - connection 20 RS is used for the uniform distribution of the fertilizer solution to 12 locations at the same time without...
Verteilerdose mit Mikrokapillare - 8 Leiter
€222,00
Praktischer Bewässerungsverteiler mit Mikrokapillare für 8 Leitungen.
Verteilerdose mit Mikrokapillare - 4 Leiter
€164,00
Praktischer Bewässerungsverteiler mit Mikrokapillare für 4 Leitungen.
Verteilerdose mit Mikrokapillare - 20 Leiter
€434,00
Praktischer Bewässerungsverteiler mit Mikrokapillare für 20 Leitungen.
Verteilerdose mit Mikrokapillare - 16 Leiter
€355,00
Praktischer Irrigationsverteiler mit Mikrokapillare für 16 Leitungen.
Distribution box with microcapillary - 12 conductors
€11,29
Practical irrigation distributor with microcapillary for 12 lines.
Micropillar 3.2 mm, 1 mm hole, cut in 120 cm increments
€0,24
120 cm cut plastic microcapillaries for irrigation and plant growing in indoor and outdoor environments.
Micropillar 3.2 mm, 0.8 mm hole, cut in 100 cm increments
€0,20
100 cm cut plastic microcapillaries for irrigation and plant growing in indoor and outdoor environments.
Capillary needle straight CNL 4-6 mm
€0,44
The capillary needle is straight and suitable for connection to the pressure DSC valve. The valve connects the capillary to the distribution hose.It opens only after reaching a pressure of...
Capillary CNL 4-6 mm - roll 200 m
€103,64
Kapillary serves as a distribution of nutrient solution to your plant. Total length: 200 m.Suitable punching tool/perforator 2.5/2.7 and 3.0 mm (when using a valve). Suitable for filters with a...
Capillary 4/6 mm - 1 m (1pc)
€0,63
The capillary distributes the nutrient solution. This product is a 1 meter long, already cut, capillary.Suitable punching tool/punch 2.5/2.7 and 3.0 mm (when using a valve). Suitable for filters with...
Irritec Topspin 12 Dripper Stakes 45°, ⌀ 25 mm
€31,60
Topspin consists of 12 individual pressure equalizing valves without a check valve mounted on a T-piece. Topspin has all the advantages and disadvantages of a standalone valve.
Irritec Spin 8-piece, 8l
€10,57
Pre-assembled kit with 8 labyrinth plugs, 8 hoses 1 m long, and 1 compensating valve. Suitable punching tool 2.5/2.7 mm. Suitable for a filter with a permeability of approx. 155,...
Irritec Spin 4-piece, straight needle
€2,38
Four straight needles for Irritec irrigation. Waterspin divides the water into 4 hoses, with each hose receiving the same water supply through a labyrinth coupling. Compatible with CNL and DCS...
Irritec Spin 4-piece, 45° needle
€3,76
Four plastic needles and tubes are designed for watering plants. It is compatible with CNL and DCS valves. Suitable for filters with a permeability of approx. 155, mU100 or 0.1...
Irritec End Stake open H profile 45°
€0,36
Plastic end needle for Irritec irrigation systems. 45° angle.
Irritec End Stake H profile 45° - knurled connector
€0,36
Jehla pro zavlažování se připojuje na 5mm kapiláru se sklonem 45°. Doporučený pracovní tlak: 0,5 - 1,5 bar.
- Choosing a selection results in a full page refresh.
{ "message": ["🪴Don't forget me..."," 🪴 Come back!"],"delay": 4400 }