Irrigation | Connectors

In large systems with variable terrain (agricultural areas, golf, ...) for aerating air pockets. It also allows aeration of the system after irrigation (suitable for underground irrigation ROOTGUARD). Valves are...

Stahovací kroužek na hadice, průměr 3/4″.

Replacement tightening ring for Aquaking hose 17-32, diameter 1″.

AquaKing Pulling Ring 11-23 ½“

< p > PE coupling for connecting a 25mm diameter hose. < /p >

PE coupling for connecting a 20mm diameter hose.

PE connector for joining a 16mm diameter hose.

Quick coupling for hose. Designed for 1/2 hose.

Quick coupling for 1/2 "hose- male x outer thread 3/4"

Quick coupling for hose with stop valve. Designed for 1/2 hose. When the quick coupling is disconnected from the male, the flow automatically stops without the need to turn off...

Irrigation hose made of plastic and aluminium. 82 cm long.

Regulation PE valve continuous 20x20 mm

Průběžný regulační PE ventil 16x16 mm na závlahu.

Polyethylene component used for water distribution or watering during cultivation.

Plastic component used for water distribution or top dressing during cultivation.

Reducing coupling is used for reduction when connecting low-pressure PE pipes 20 mm and 25 mm.

Reduced coupling is used to reduce when connecting low-pressure PE pipes 20 mm and 16 mm.

Polyethylene component used for water distribution or watering during cultivation.

Set of seals/bushing to reservoir It is a seal that is inserted into the hole of the reservoir. The clutch of the clutch I, L, T or the valve ends...

Access to the reservoir via a 1/2 hose In the package, there is a seal and access terminated with a 1/2 hose connector.

Plastové téčko, T spoj do závlahy. Průměr 20 mm.

Plastové téčko, T spoj do závlahy. Průměr 16 mm.

Plastové koleno, L spoj, do závlahy. Průměr 20 mm.

Plastové koleno, L spoj, do závlahy. Průměr 16 mm.

Green push-in double-sided connector for 1/2 hoses.

Příslušenství pro hydroponický truhlík LIBRA Vyústění odtoku truhlíku (ke každému truhlíku jsou třeba 2 L) Důležité pro správné odvodnění truhlíku Zvyšuje efektivitu pěstování

Kapilára PVC 5x3.5 mm je určena k zavlažování. Balení: role 500 m.

Irritec irriter, 3/4 ″ thread. Plastic plug for pressure irrigation.

Spunt to irritor irritor, inner thread 1 ″. Plastic plug for pressure irrigation.

Irritec PP coupling 2x internal thread 3/4″. Plastic coupling for pressure irrigation.

Irritec PP connector 2x internal thread 1″. Plastic connector for pressure irrigation.

Irritec PP coupling 2x internal thread 1/2″. Plastic coupling for pressure irrigation.

Nipl plastic reduction for irrigation 2x outer thread 3/4 ″.

Irritec PP connector 2x external thread 1 for pressure irrigation. Plastic.

Irritec PP coupling 2x external thread 1/2″ for pressure irrigation. Plastic.

Plastic reduction internal thread/external thread 1/2x 3/4. Suitable for Irritec pressure irrigation.

Irritec PP reducer internal thread/external thread 3/4 x 1.

Plastic reducer for hose, internal thread/external thread 1 x 3/4. Suitable for Irritec pressurized irrigation.

Irritec PP reduction internal thread/external thread 1/2 x 3/4. Suitable for Irritec pressurized irrigation.

Irritec PP redukce vnitřní závit/vnější závit 1/2" x 1". Vhodné pro tlakovou závlahu Irritec.

Irritec PP reducer 2x internal thread 1 x 3/4 for pressure irrigation. Plastic.

Irritec PP reducer 2x internal thread 1/2 x 3/4 for pressure irrigation. Plastic.

Plastic reducer external thread 3/4 x 5/4. Suitable for Irritec pressure irrigation.

Irritec PP reducer with 2x external thread 1 x 3/4.

Irritec PP reducer 2x external thread 1/2 x 3/4 for pressure irrigation. Plastic.

Irritec PP reducer 2x external thread 1/2 x 1 for pressure irrigation. Plastic.

Plastic end piece for Irritec irrigation. Diameter 25 mm.

Plastic end piece for Irritec irrigation. Diameter 20 mm.

End piece for Irritec irrigation. Diameter 16 mm.