Ebb&Flow adhesive for soaking tubs, 300 ml

Quality adhesive is specifically designed for Ebb&Flow soaking tubs. Volume 300 ml. Excessive use of adhesive may damage the tubs.

Terms and rules
Gluing must be carried out :

• At temperatures between 5-25 °C
• Containers must be dry and must be kept in dry conditions during the curing process.

Support for table containers

• The tubs are designed to withstand a maximum evenly distributed load of 70 kg/m2.
• The following criteria must be met :
• Lavatory trays must be supported with a gap of up to 500 mm.
• The support should be located less than 70 mm from the edge of the adhesive.
• The support should be located less than 200 mm from the edge of the bench tray. Note that the tub must not rest on the supporting beam
• NOTE: The support MUST be placed under the part of the tub that contains the adhesive edge (see drawing).