Malapa Air Ionizer IN03

Air Ionizer IN03

Improved and silent air ionizer IN03. The negative ion generator IN03 does not produce ozone. Tested by the State Health Institute.

Enjoy freshly cleaned air enriched with negative ions in rooms without the need to use large and noisy devices for this purpose.

The IN03 air ionizer has been successfully tested by the State Health Institute. The air ionizer is a device for enriching the air with negative ions. The device is a highly efficient generator of negative ions and covers even larger rooms up to 150m3. No harmful ozone was detected with the IN03 ionizer. For long-term stay in the room, we recommend staying at least 2.5m away from the device. Negative ions are emitted into space by a special emitter made of carbon fibers. The produced negative ions (anions) are colorless and odorless (beware, do not confuse with ozone).

Wherever you use electrical and electronic devices, positive ions (cations) are created by the action of electrostatic charges, these cations cause increased nervousness and fatigue. This air ionizer enriches the air with negative (anion) ions. These negative charges neutralize this positive charge and thereby improve the breathability of the air. The device neutralizes electrostatic charges and increases the concentration of negative ions.

The ionizer is not equipped with any fans or filters that need to be replaced (eliminating additional unnecessary expenses). The device can be mounted with wall brackets (included in the delivery). Long-term and flawless operation even under extreme conditions, over design.

Use of the ionizer:

Neutralization of odors and enrichment of air with negative ions in restaurant spaces, toilets, kitchens, hospitals, homes, food industry, waiting rooms, changing rooms, department stores, low-energy buildings, relaxation rooms, salt caves, sports halls, gyms, antistatic workplaces. At home, in the food industry, industry, or in science...

Measured concentrations of light negative ions:

• at a distance of 50cm from the emitter, the average concentration of negative ions is 3.0×105 per 1cm2
• at a distance of 100cm from the emitter, the average concentration of negative ions is 8.0×104 per 1cm2
• at a distance of 150cm from the emitter, the average concentration of negative ions is 2.8×104 per 1cm2
• at a distance of 200cm from the emitter, the average concentration of negative ions is 1.2×104 per 1cm2
• at a distance of 250cm from the emitter, the average concentration of negative ions is 4.8×103 per 1cm2
• at a distance of 300cm from the emitter, the average concentration of negative ions is 1.3×103 per 1cm2
• at a distance of 350cm from the emitter, the average concentration of negative ions is 7.5×102 per 1cm2
• at a distance of 400cm from the emitter, the average concentration of negative ions is 5.4×102 per 1cm2

Installation of the ionizer:

The ionizer produces high voltage with minimal current. Install the device indoors in a safe and dry place with good air circulation. The device must be placed at a height that is out of reach of people and animals. The optimal distance from the device for long-term stay of people and animals is 2.5m. The device must not come into contact with water or other liquids (do not use in the bathroom).

Maintenance of the ionizer:

Always observe safety precautions during maintenance. Before handling the device, turn it off and unplug it from the power supply. The emitter (brush) may get dirty over time, you can clean it by vacuuming or scraping it off (or replacing it with a new one). Do not use this product and its accessories in violation of this manual! Apart from cleaning the brush, the ionizer does not require any maintenance. Do not use any scrubbing agents or chemical solvents (paint thinners), as these agents could damage the surface. The recommended cleaning method is mechanical.

Technical specifications of the IN03 ionizer: power supply- 230V AC 50Hz

power consumption- up to 2W

concentration of negative ions (anions)- avg. from 3.0×105/ 1cm2 (50cm) to 5.4×102/ 1cm2 (400cm)

ozone concentration- not detected

room size- up to 150m3

main switch- with LED indication (indicates connection to the electrical network)

power cord with plug- 3 meters

operating temperature- -20° to 70°C operating humidity- 10% to 70% RH (non-condensing)

storage temperature- 0° to 45°C emitter material (brush)- carbon fibers

emitter size (brush)- 12mm, total 31mm

box size- length 170, width 120, height 85mm

installation- on a surface/wall (brackets)

total weight- 900g

box- ABS

protection- IPXX

RoHS