Malapa distribution board 8+2 (400V) controlled by KL04 timer

KL04 Distribution board 8+2

The wall-mounted distribution board from the KL series is designed for powering and switching electrical appliances. It can power and switch both inductive and resistive loads. It can be used, for example, for switching lighting or greenhouse lighting, pumps, sewage treatment plant motors, advertising, heating, and many other regular activities.

The switching on and off of sockets on this device is controlled by a power contactor and is designed for the switching capacity of the given distribution board. Each socket can handle a maximum of 1200W inductive or 2500W resistive loads. The distribution board has integrated fire protection and will force the contactor to switch off the sockets. The timer has a backup power source for 200 hours, ensuring operation even in case of a power outage. The timer programming is done by pulling out and pushing in pegs around the dial.

You can also manually switch the distribution board. Advantages - The timer is not affected by electromagnetic waves or induction fields. Socket labeling - Switched sockets - 8 single-phase sockets controlled by the timer (ballast-max 16x 600W) Non-switched sockets - 2 single-phase sockets under continuous voltage.

Technical data KL04 - power supply - 400V AC 50Hz, supply cord with plug 16A/5 pins 5 meters, maximum load - 3x 3500 W (3x 16A), each socket max. - 1200W inductive load, 2500W resistive load, IP 43 protection, environment - ordinary, outdoor ambient temperature - +40°C to -10°C. Total weight - 3780g, size - length 225, width 180, height 100mm, box - ABS, 2 years warranty.