Malapa distribution board 2+1 (230V) controlled by KL00 timer

Regarding this array: KL00 Distribution board 2+1. The smallest wall-mounted distribution board from the KL series is designed for powering and switching electrical appliances. It powers and switches both inductive and resistive loads. It can be used, for example, for switching lighting or illuminating a greenhouse, pumps, a motor for a wastewater treatment plant, advertising signs, heating, heating, and many other regular activities. The switching on and off of sockets for this device is controlled by a silent high-power relay. Switching contacts made of precious metal alloys allow switching of inductive loads (e.g. discharge lamps) up to 1200W or resistive loads (e.g. radiant heaters) up to 2500W. The distribution board has integrated fire protection and forces the contactor to open (turns off the switched sockets). The switching clock with a built-in backup power source guarantees operation even in the event of a power failure for up to 200 hours. The switching clock programming is done by pulling out and inserting the discs around the dial for turning on and off. The distribution board can also be manually switched. Advantages - The switching clock does not react to electromagnetic radiation or to an induced field. The relay is silent when switching. Socket designation - Switched sockets - 2 single-phase sockets controlled by switching clocks (ballast - max 2x 600W) Unswitched socket - 1 single-phase socket under continuous voltage. Technical data KL00 - supply cord with plug 3 meters, max load 3500W (16A), each socket max - 600W inductive load - 1200W resistive load 230V 50Hz AC, supply cord with plug - 3 meters, protection - IP 43, environment - ordinary, outdoor ambient temperature - +40°C to -10°C, total weight - 1250gr. Size - length 165, width 140, height 95mm, box - ABS. 2 years warranty.