irritec

Irritec PP connector 2x internal thread 1″. Plastic connector for pressure irrigation.

Irritec PP coupling 2x internal thread 3/4″. Plastic coupling for pressure irrigation.

Irritec PP coupling 2x external thread 1/2″ for pressure irrigation. Plastic.

Irritec PP connector 2x external thread 1 for pressure irrigation. Plastic.

Nipl plastic reduction for irrigation 2x outer thread 3/4 ″.

Spunt to irritor irritor, inner thread 1 ″. Plastic plug for pressure irrigation.

Irritec irriter, 3/4 ″ thread. Plastic plug for pressure irrigation.

Irritec PP reducer 2x internal thread 1/2 x 3/4 for pressure irrigation. Plastic.

Irritec PP reducer 2x internal thread 1 x 3/4 for pressure irrigation. Plastic.

Irritec PP reducer 2x external thread 1/2 x 1 for pressure irrigation. Plastic.

Irritec PP reducer 2x external thread 1/2 x 3/4 for pressure irrigation. Plastic.

Irritec PP reducer with 2x external thread 1 x 3/4.

Plastic reducer external thread 3/4 x 5/4. Suitable for Irritec pressure irrigation.

Irritec PP redukce vnitřní závit/vnější závit 1/2" x 1". Vhodné pro tlakovou závlahu Irritec.

Irritec PP reduction internal thread/external thread 1/2 x 3/4. Suitable for Irritec pressurized irrigation.

Plastic reducer for hose, internal thread/external thread 1 x 3/4. Suitable for Irritec pressurized irrigation.

Plastic reduction internal thread/external thread 1/2x 3/4. Suitable for Irritec pressure irrigation.

Irritec PP reducer internal thread/external thread 3/4 x 1.

Tento děrovač se používá k děrování otvorů v PE hadici, po kterých lze umístit tlakové ventily CNL nebo DCS.

This puncher is used for punching holes in PE hoses, after which pressure valves CNL or DCS can be placed.

Four plastic needles and tubes are designed for watering plants. It is compatible with CNL and DCS valves. Suitable for filters with a permeability of approx. 155, mU100 or 0.1...

Four straight needles for Irritec irrigation. Waterspin divides the water into 4 hoses, with each hose receiving the same water supply through a labyrinth coupling. Compatible with CNL and DCS...

Pre-assembled kit with 8 labyrinth plugs, 8 hoses 1 m long, and 1 compensating valve. Suitable punching tool 2.5/2.7 mm. Suitable for a filter with a permeability of approx. 155,...

Topspin consists of 12 individual pressure equalizing valves without a check valve mounted on a T-piece. Topspin has all the advantages and disadvantages of a standalone valve.

Irritec Waste Basket – 1" Plastic Connector The Irritec Waste Basket is a durable filter attachment with a 1" connector, designed to prevent debris from entering irrigation systems. Key Features:...

Plastic distributor for 2 irrigation capillaries with a diameter of 5 mm.

Plastic distributor for 4 irrigation capillaries with a diameter of 5 mm.

Plastic component used for water distribution or top dressing during cultivation.

Polyethylene component used for water distribution or watering during cultivation.

Polyethylene component used for water distribution or watering during cultivation.

The 180° Irritec MSU spray nozzle is attachable to a 5 mm diameter capillary. Maximum flow rate: 160 l/hr. Recommended working pressure: 1.0 - 2.5 bar. The spray nozzle is...

The Irritec MSU Spray Nozzle with 360° section is attachable to a 5 mm diameter capillary. Maximum flow rate: 160 l/hr. Recommended working pressure: 1.0 - 2.5 bar. The spray...

In large systems with variable terrain (agricultural areas, golf, ...) for aerating air pockets. It also allows aeration of the system after irrigation (suitable for underground irrigation ROOTGUARD). Valves are...

T spoj is used for connecting 4mm internal diameter air hoses.

Spoj Y modrý, průměr 6mm. Pro NFT systémy Gro Tank.