Sort by:
Distributor for 4 capillaries 5 mm with tip and spikes upwards
Plastic distributor with spike and spikes upwards for 4 irrigation capillaries with a diameter of 5 mm.
Manifold for 4 capillaries 5 mm horizontal
€0,98
Plastic distributor for 4 irrigation capillaries with a diameter of 5 mm.
Manifold for 2 capillaries 5 mm
€0,56
Plastic distributor for 2 irrigation capillaries with a diameter of 5 mm.
Spray nozzle MSU 360°
€1,79
The Irritec MSU Spray Nozzle with 360° section is attachable to a 5 mm diameter capillary. Maximum flow rate: 160 l/hr. Recommended working pressure: 1.0 - 2.5 bar. The spray...
Spray nozzle MSU 180° section
€0,98
The 180° Irritec MSU spray nozzle is attachable to a 5 mm diameter capillary. Maximum flow rate: 160 l/hr. Recommended working pressure: 1.0 - 2.5 bar. The spray nozzle is...
Capillary connector 5 mm, plug type, set of 10
€1,15
The plastic connector for 5 mm capillary, plug type, is designed for capillary irrigation of gardens, plants and crops. Recommended for pressure 0.5 to 1.5 bar. Supplied in a set...
Capillary connector 5 mm, Manifold type
€1,68
The plastic connector for 5 mm capillary, Manifold type, is designed for capillary irrigation of gardens, plants and crops. Recommended for pressures of 0.5 to 1.5 bar.
Capillary connector 5 mm, type L
€1,54
The plastic connector for 5 mm capillary, type L elbow, is designed for capillary irrigation of gardens, plants and crops. Recommended for pressure 0.5 to 1.5 bar.
Capillary connector 5 mm, cross type
€3,04
The plastic 5 mm capillary connector, cross type, is designed for capillary irrigation of gardens, plants and crops. Recommended for pressures of 0.5 to 1.5 bar.
Irritec waste basket plastic, 1″ connector
€2,73
Irritec Waste Basket – 1" Plastic Connector The Irritec Waste Basket is a durable filter attachment with a 1" connector, designed to prevent debris from entering irrigation systems. Key Features:...
Irritec lever punch for PE hoses, hole 4 mm
€50,89
Hole punch pliers for gardeners and growers. Quick cut pliers will help with holes with a diameter of 4 mm. Suitable for CNL capillaries and DCS valves.
Irritec punch for PE hoses, hole 4 mm
€12,59
This puncher is used for punching holes in PE hoses, after which pressure valves CNL or DCS can be placed.
Irritec punch for PE hoses, hole 3 mm
€12,59
Tento děrovač se používá k děrování otvorů v PE hadici, po kterých lze umístit tlakové ventily CNL nebo DCS.
- Choosing a selection results in a full page refresh.
{ "message": ["🪴Don't forget me..."," 🪴 Come back!"],"delay": 4400 }